How to clean viva self cleaning water dispenser? (2023)

Do I need to clean a self cleaning water dispenser?

What does self-cleaning mean? Many water coolers include a self-cleaning feature. But hold on a second, this doesn't mean you don't need to clean your water cooler – it merely means the inner tanks and tubings become sanitized by a self-cleaning feature.

Overview. The Viva Self Cleaning Stainless Steel water cooler has an automatic self cleaning system that's injects unstable oxygen into the water cooler. This charged oxygen destroys bacteria on contact, preventing the bacteria biofilm buildup that occurs in regular coolers.

Remove the cap from a spare empty 5-gallon bottle. Pour the bleach (2 tbsp.) or vinegar (2 cups) and hot tap water (2 Gallons) into the empty bottle. Apply the cleaning bottle to the dispenser. Plug the power cord back into the wall outlet and turn the dispenser back on.

To be consistent with these good sanitation techniques, it is important that you periodically clean and sanitize your bottled water dispenser. Recommended frequency of cleaning is once every 3 to 6 months.

A vinegar cleaning solution is a natural and safe way to disinfect a water cooler. Mix a vinegar solution from 1 cup of distilled white vinegar and 3 cups of hot water (or any 1:3 ratio) and fill the cooler reservoir. Use a gentle scrub brush with a long handle to scrub the inside of the reservoir.

Self Clean Hot Cold Bottled Water Cooler: Viva Costco, Whirlpool ...

Rinse well in clean tap water and replace on cooler. Wash hands with soap and warm water before handling. or 20 drops (1 mL) of bleach in 1 cup (250 mL) of water]. Rubbing alcohol may also be used, but must be completely evaporated before placing the bottle in the cooler.

Notice: When your bottle is empty the dispenser will beep intermittently and the LED nightlights will blink until a fresh bottle is connected. You may also hear a sucking sound when the bottle empties.

Mix 1 cup of distilled white vinegar with 3 cups of hot water and pour this into the reservoir of the cooler. (Gloves may come in handy here, especially if you have sensitive skin.) Wipe the inside of the reservoir clean using this solution and a microfiber cloth.

The algae is completely safe and easily removed with a paper towel dampened with vinegar or lemon juice. To prevent this film from developing, place your dispenser in area away from fluorescent lighting and replace empty water bottles immediately.

How do I clean my water dispenser nozzle?

Scrub the Water Dispenser Nozzle

Using a ​clean toothbrush​ or other small brush with soft bristles, scrub any visible parts of the tubing and spout area. Dip the brush in more vinegar if needed to get the areas clean.

It's much easier to flush a salt out of the system than to get vinegar out of some plastics. But next time you might just want to treat the water cooler with hydrogen peroxide at three teaspoons per gallon.

Getting Rid Of Mold on Water Dispensers

Mold is a health hazard and can easily accumulate on water dispensers. Mold not only gives off a foul odor, but it can also spread bacteria and germs. The worst part about mold is the fact that it develops on hard to reach areas in the dispenser.

Contaminated workplace water is not only unappetizing, but it can also pose a health risk to coworkers. Certain species of bacteria that are common in bottled water cooler dispensers can cause a person to contract Legionnaires' disease, which causes flu-like symptoms and can eventually turn into pneumonia.

If it's possible to soak the area in a cup or dish filled with vinegar, that is even better. After the area has soaked, gently scrub away the loosened deposits. Use an old tooth brush dipped in vinegar for additional scrubbing. (Electric toothbrushes will make the job even easier.)

IMPORTANT: Set both power switches (on the back of the dispenser) to the OFF position and unplug the water dispenser before cleaning. Use a solution of warm water and baking soda (approximately one tablespoon of baking soda to one quart of water). This will clean and neutralize odors. Then rinse and wipe dry.

If it's an open-loop - contains a pump, reservoir, radiator(s) and waterblock(s) for your CPU and/or GPU, then you would have to empty and refill the loop every 6-12 months depending on the coolant/anti-algae you use.

How do you self clean Avalon water dispenser?

To begin the self cleaning cycle press and hold the self cleaning switch for a few seconds. The self cleaning indicator light will beging to blink and will continue until the cycle is complete. The cycle will take 90 minutes to complete, please do not use the water cooler during this time.

The best way to clean mold out of a refrigerator water dispenser is by using a bleach and water solution. Simply mix one part bleach with three parts water, then pour it into the reservoir and let it sit for about 15 minutes. After 15 minutes have passed, use a cloth or sponge to wipe away any remaining mold.

Self Clean Hot Cold Bottled Water Cooler: Viva Costco, Whirlpool ...